Quick Answer: What Is The Best Finish To Put On A Bar Top?

What is bar top epoxy?

Bar Top Epoxy.

Used in a variety of applications which require a hard, durable and crystal clear coating.

This epoxy is often used for bar tops and tables.

Covering often is done with a light coat to seal the surface, followed up by flood coats 1/8″ thick at a time until the desired thickness is reached..

Can you put a clear coat over epoxy?

Clear epoxy coatings are usually applied as an additional protection layer on top of an epoxy or polyurethane floor. They can serve several purposes such as scratch resistance, protecting flakes and other aggregates, as well as general protection from dirt pick up.

Can you put polyurethane over epoxy?

Epoxy with two-part polyurethane varnish Two to three coats of epoxy also provide a stable base for clear two-part polyurethane finishes. Applied over epoxy, they perform beautifully together and outlast either coating used by itself.

Should I use epoxy or polyurethane?

The main difference between this type of material and the epoxy systems is in the molecular structure of the two, which affects how the molecules fuse together during the curing process. Essentially, polyurethanes have a higher cross-link density than epoxies, making them more durable.

What is the best bar top epoxy?

One of the best kinds of epoxy from the ProMarine brand is the Crystal Clear Bar Top Resin. The bar top clear coat is considered the ideal epoxy type which satisfies all your coating needs. This type of epoxy comes in the form of a kit. A hardener is included in the kit.

How many coats of polyurethane should a bar top have?

threeThings You’ll Need Polyurethane is typically applied in three or more coats, with a light sanding between coats. Thin polyurethane with paint thinner makes it easier to apply and shortens the drying time between coats.

How do you waterproof a bar top?

Applying polyurethane as a top coat seals the wood with a glossy, clear finish to protect your bar. Sealing a bar top protects the wood finish from moisture. Place a sheet of 50-grit sandpaper around a sanding block. Sand the entire bar surface.

How do you stain a bar top?

Apply the Stain You will need to have a sponge brush to apply stain to your bar rail and bar top. Apply the coat evenly and make sure that there are no spaces left unstained. You may want to use a few coats, depending on how dark you want the stain to be.

What is the best outdoor wood sealer?

Our Top PicksBEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. … EASIEST APPLICATION: Eco Advance Exterior Wood Water Repellent. … BEST VALUE: Olympic Stain Smartguard Concentrated Sealant. … LONGEST-LASTING SEAL: Olympic Stain Maximum Waterproofing Sealant.

Does polyurethane make wood waterproof?

Polyurethane, varnish, and lacquer are tried-and-true sealants with excellent waterproofing properties. They’re either brushed or sprayed onto clean, sanded wood and then allowed to dry completely, prior to the piece being lightly re-sanded and recoated.

What can you put over epoxy?

Finish coatings like paint or varnish are applied over an epoxy barrier coat to decorate the surface and protect the epoxy from sunlight. The finish coating extends the life of the epoxy moisture barrier, which in turn provides a stable base that extends the life of the finish coating.

What do they use on bar tops?

Some bar top materials you can coat with epoxy:Laminate.Concrete.Formica.Metal.Wood.Ceramic.

Can I put polyurethane over resin?

Yes. Poly sticks quite well to epoxy.

How durable is bar top epoxy?

As we already mentioned, epoxy resin is very durable. However, despite its strength, what makes epoxy resin so easy to work with is how sanitary it can be. Extremely easy to clean, it is ideal for businesses, kitchens, and laboratories that need to maintain a sterile environment.

How much epoxy do I need for a bar top?

Most common table top and bar top epoxies provide approximately 12 sq feet per mixed gallon coverage at 1/8″ thickness.

What wood should I use for a bar top?

For a brighter look, a lighter hardwood such as ash or maple is a good choice. If you’re going for that deeper, more traditional pub look, a darker hardwood such as Bubinga or walnut may suit your needs.